Our Services
Internationally compliant services in welded fabrication, non-destructive testing, inspection and certification.
Non-Destructive Testing (NDT) & Measurement Services
Non-destructive testing with VT, MT, PT, UT, RT and ET methods; coating thickness, surface roughness, hardness and wall thickness measurements; destructive laboratory tests.
Visual Testing (VT)
Visual examination of weld seams and surfaces with standard-compliant equipment and certified personnel, evaluated against…
DetailsMagnetic Particle Testing (MT)
Detection of surface and near-surface cracks, lack of fusion and inclusions in ferromagnetic materials by the magnetic particle…
DetailsLiquid Penetrant Testing (PT)
Detection of surface-breaking discontinuities in stainless steel, aluminium and other non-magnetic materials by capillary action.
DetailsUltrasonic Testing (UT)
Detection and sizing of internal flaws (lack of fusion, incomplete penetration, slag, cracks) in welds and plates using…
DetailsRadiographic Testing (RT)
Permanent film record and interpretation of internal flaws in pipelines, pressure vessels and critical welds using X-ray or gamma…
DetailsEddy Current Testing (ET)
Electromagnetic detection of surface cracks on painted or coated surfaces, heat exchanger tubes and thin-section components.
DetailsPaint & Coating Thickness Measurement
Measurement of dry film thickness (DFT) of corrosion protection systems by magnetic and eddy current principles, reported against…
DetailsSurface Roughness Measurement
Measurement and evaluation of blast profile after abrasive blasting and roughness values (Ra, Rz) of machined surfaces.
DetailsHardness Testing
Portable (Leeb, UCI) and laboratory hardness measurements for weld zones, heat-treated parts and material verification.
DetailsUltrasonic Wall Thickness Measurement
Single-side measurement of corrosion-related wall loss in tanks, pipelines, pressure vessels and steel structures, providing…
DetailsDestructive Laboratory Testing
Organisation and evaluation of tensile, bend, impact, macro/micro examination and hardness tests for WPQR, welder qualification…
DetailsWelding Technology, Procedure & Personnel Certification
WPQR/WPS qualification, welder and welding operator certification, and EN ISO 3834, EN 1090 and EN 15085 welded fabrication qualification for manufacturers.
Welding Procedure Qualification (WPQR / PQR & WPS)
Planning and witnessing of welding procedure tests, coordination of NDT/destructive tests and preparation of WPQR/WPS documents.
DetailsWelder Certification
Organisation and witnessing of welder examinations on steel, aluminium and other materials, with certification under EN ISO 9606…
DetailsWelding Operator Certification (EN ISO 14732)
Examination and certification of operators and setters of submerged arc, robotic, orbital and mechanised welding systems.
DetailsEN ISO 3834 Welding Quality Requirements Certification
Gap analysis, system set-up and audit process management for certifying that welding fabricators meet comprehensive, standard or…
DetailsEN 1090 Steel and Aluminium Structures (FPC & CE)
Setting up the factory production control (FPC) system, determining the execution class (EXC) and managing CE marking…
DetailsEN 15085 Railway Vehicle Welding Certification
System set-up, welding coordination and certification process management for CL1–CL4 certification levels in the welded…
DetailsInspection, Quality Control & Project Management
Third/second-party inspection of fabrication and erection, QC personnel provision, 3.1/3.2 material inspection, project control-approval and periodic inspection services.
Third-Party Inspection
Independent inspection, witness testing and conformity reporting on behalf of the client or end user during fabrication, erection…
DetailsSecond-Party Fabrication & Erection Inspection
Fabrication monitoring, weld and dimensional checks and progress reporting on behalf of the customer at supplier workshops and…
DetailsQuality Control Services & Inspector Provision
Provision of welding inspectors, NDT personnel, coating inspectors and QC engineers for the duration of your project; quality…
Details3.1 & 3.2 Material Inspection (EN 10204)
Verification of EN 10204 3.1 certificates for steel products and, under 3.2, witness testing, marking and certificate endorsement…
DetailsProject Control and Approval Services
Review and approval of drawings, weld details, WPSs, ITPs, quality plans and fabrication documents against standards, eliminating…
DetailsDimensional Control & Pre-Shipment Inspection
Checking the geometric tolerances of welded structures and final pre-shipment inspection (PSI): quantities, marking, surfaces…
DetailsPeriodic Inspection Services
Periodic inspection and reporting for integrity and remaining-life assessment of in-service pressure vessels, storage tanks…
DetailsProduct Certification & CE Marking
CE certification process management for pressure equipment under PED 2014/68/EU; CE marking support for construction products and steel fabrication.
CE Certification of Pressure Equipment (PED 2014/68/EU)
PED category and module determination, design dossier preparation, fabrication inspection and Notified Body process management…
DetailsConstruction Products and Steel Fabrication CE Certification
Declaration of Performance (DoP), FPC certificate and CE marking process for steel/aluminium structural components and other…
DetailsExternal Certification & Consultancy Services
ISO 9001, ISO 14001, ISO 45001 and IATF 16949 management systems; welding engineering, design calculation verification and EN 1090 / EN ISO 3834 / EN 15085 compliance consultancy.
Welding Engineering & Welding Coordination (EN ISO 14731)
External welding coordinator (IWE/IWT) service, welding plan and WPS management, root-cause analysis of weld defects, consumable…
DetailsDesign Calculation Verification and Approval
Independent review and verification of design calculations for steel structures, pressure equipment, lifting equipment and welded…
DetailsISO 9001:2015 Quality Management System
Establishing and documenting the quality management system, internal audits and management review; preparation for the accredited…
DetailsISO 14001:2015 Environmental Management System
Identification of environmental aspects and legal requirements, establishment of the environmental management system and…
DetailsIATF 16949 Automotive Quality Management System
Establishment of the IATF 16949 system for manufacturers in the automotive supply chain, core tools (APQP, PPAP, FMEA, MSA, SPC)…
DetailsEN 1090 / EN ISO 3834 / EN 15085 Compliance Consultancy
Adapting the requirements of welding fabrication standards to your company, documentation, training and pre-audit preparation…
DetailsTraining Services
EN ISO 14731 welding coordination personnel training; welding technology, NDT, quality standards and corporate technical training — at your premises or our training centre.
EN ISO 14731 Welding Coordination Personnel Training
Practical training programme covering the tasks, responsibilities and technical knowledge requirements of welding coordinators…
DetailsWelding Technology and Standards Training
Modular courses for production personnel on welding symbols, reading WPSs, EN ISO 5817 acceptance criteria, weld imperfections…
DetailsNDT Awareness and Practical Training
Principles, applications and limitations of NDT methods and interpretation of reports for quality and production personnel…
DetailsQuality Management Systems Training
ISO 9001 foundation and internal auditor courses, integrated management systems, risk-based thinking, root-cause analysis and…
DetailsCorporate & Company-Specific Technical Training
Tailored training programmes designed around your products, standards and customer requirements, on topics such as EN 1090, EN…
DetailsNot sure which service you need?
Tell us about your project and we will define the right scope together.